The customized X-ray door china has a very good shielding effect on the radiation source. Its manufacturing material is very special and its price is also very expensive. In order to make its service life longer, it needs to be cleaned for a long time. Moreover, customized X-ray door china occupies a high position. Not only that, when cleaning, it can not be the same as ordinary doors. There are many things to pay attention to. Let's take a look at them for a long time.

Precautions for customized X-ray door china cleaning:

1. First of all, the dust on the customized X-ray door china should be cleaned in time, the special door and the lead glass near the door should be kept clean, and the door, laminated glass and hardware should be kept clean and bright. Even if the stainless steel plate is stained with dirt and other stains, its compounds will corrode the surface of the stainless steel plate, affect the corrosion of the steel body for a long time, endanger the use characteristics of radiation, and cause unnecessary radiation risks.

2. Some pollutants are items that cannot be cleaned. For example, the customized X-ray door china is covered with oil stains and other dirt that cannot be cleaned directly. It can be cleaned with detergent, but do not use strong alkaline or strong acidic water-based chemicals to clean these oil stains, because this will not only easily damage the surface finish of aluminum alloy profiles, but also damage the protective film, resulting in oxidation of the surface and air, and corrosion of customized X-ray door china.

3. When customized X-ray door china is cleaned, the particulate dirt inside the frame shall be removed immediately to prevent the drainage pipe or safety passage from being blocked. Once blocked, it will be difficult to drain. If the consequences are serious, it will continue to endanger the use of the special door of the hospital, reduce the service life of customized X-ray door china, and also have potential safety hazards.

How to clean customized X-ray door china:

1. Customized X-ray door china leaf cleaning:

The customized X-ray door china is made of tempered glass. As the medical door leaf is transparent, once the stain is exposed, the dirty part needs to be carefully cleaned when cleaning customized X-ray door china. General dirt can be wiped with a soft cloth dipped in neutral detergent, and stubborn stains can be wiped with alcohol or gasoline.

2. Sensor cleaning

In general, the sensor of customized X-ray door china is prone to dust, which greatly reduces the sensitivity of the sensor and causes obstacles to the sensor. Therefore, when cleaning, it is necessary to "wipe" with a clean soft cloth. Be careful not to wipe the actuator during cleaning. The detection direction of the sensor is moved away to avoid a change in the detected direction of the sensor. Medical doors installed in clean rooms, clean corridors, operating rooms and other places with similar cleanliness requirements are called medical doors. The special controller for operation door and foot sensor switch have excellent performance. Medical staff only need to put their feet into the switch box to switch the automatic door, or operate it manually.

3. Perimeter cleaning:

One side of customized X-ray door china always faces outward, so when customized X-ray door china is opened, external dust, impurities, fallen leaves and other substances are easy to fall on the running track of the inductive medical door. Therefore, when cleaning, pay attention to cleaning customized X-ray door china guide rail, especially the garbage on the slide rail groove.

There are many things to pay attention to when cleaning customized X-ray door china. The customized X-ray door china after cleaning and maintenance can make its service life longer, so the cleaning work in the hospital also needs to be serious. The above are the precautions when cleaning and the recommended cleaning methods. I hope it can help you.