Pay attention to these points when installing good price and quality hermetic door china

1. When carrying good price and quality hermetic door china, try to avoid scratching or colliding the door frame and door leaf. Door frames and doors should also be placed on the indoor level ground to avoid direct sunlight, but there should be air circulation. Remember to put the door frame and the door leaf at the same angle, so that it is easy to damage the door frame and the door leaf.

2. The installation of good price and quality hermetic door china shall be carried out after the installation of ground works.) At the entrance, the wall putty shall be leveled before installation (all holes for wall tiles and stones shall be pasted on one side of the entrance).

3. Reserved holes for good price and quality hermetic door china. It is strictly forbidden to install masonry holes.

4. The humidity of the hole wall must be checked when good price and quality hermetic door china is installed. When the humidity of the installation hole wall reaches 25%, the installation can proceed normally. When the humidity of the installation hole wall is 25%, the moisture-proof isolation layer shall be set on the installation hole wall.

5. If the corner wall or T-wall is equipped with a ward door, the width of the side without door frame shall not be less than 50 mm before installation. Of course, the width of the false wall can be determined according to the width of the line, which can avoid the problem of asymmetric door edges on both sides.

6. If the door frame of good price and quality hermetic door china is made of medium density fiberboard material, it needs to be assembled with screws when assembling the door frame. When the door frame is made of multilayer boards or solid boards, the door frame can be fixed with nails.

7. When installing the door frame of good price and quality hermetic door china, the verticality of the door frame shall be adjusted to avoid damage to the door frame due to drying and expansion of the foaming agent.

8. Good price and quality hermetic door china may have power lines on both sides of the door frame, so the power on operation shall be standardized when installing the door frame.

9. When measuring the air hole, determine the molding height and wall thickness of the floor according to the decorative baseline.

10. The reserved dimensions from single door, auxiliary door and double door to door opening are door opening height=40mm, door opening width=65mm, and other types of combined doors will be determined according to the specific situation.