What are the installation tips for Cheapest ICU Automatic Door?Most ICU Automatic Doors come with a 2-step installation process. To simplify the cost, most ICU Automatic Doors require installation at the same time as the main doors. The ICU Door has a steel frame which is connected to the garage door by a chain, as is the case with the other door types, but this time, a standard door latch mechanism allows easier access to the door. The first part of the installation will be to remove the door and install the frame. In this post, we will highlight some of the key steps to avoid major complications in securing the ICU Door.Step 1: Remove the DoorThe first step before installing the door is to remove the door. You should replace the door in good condition with one that will not cause damage to the garage, so make sure to get a professional inspection in order to check and clean the door.

Cheapest ICU Automatic Door is not secured when it is installed. A quick-release pin protects the door from accidental opening. You may also like: Best-selling ICU Automatic Door with Auto Lock, Latch and Key, Automatic Door LockBest-selling ICU Automatic Door with Auto Lock, Latch and Key, Automatic Door Lock 4.5More Info How to Remove Door Latch Screw: Before removing the door latch screw, remove the door latch nut. You can usually pull out the screw with one hand, then use a screwdriver or any other tool to remove the old one. The lock button has four pins that you can turn to release the door latch. Tip: To secure the door in your home:Turn the door handle in a clockwise direction, then in a counterclockwise direction.Press the lock button, then pull the door handle.Lock and unlock the door.Open and close the door.