Do you know the daily inspection methods of automatic doors? Let's follow the editor of ICU Automatic Door to have a simple understanding!
1. The inspector walks towards the automatic door from outside or inside the door at a normal speed. The automatic door should open automatically. The movement of the automatic door should be smooth and there is no collision. When passing through the automatic door at a slow speed, the automatic door should remain open.
2. When the inspector leaves the detection area of ​​the automatic door sensor, after a delay of 1-10 seconds (the length of time can be set by the automatic door switch parameter), the automatic door will automatically close, and the movement of the automatic door should be smooth and there is no collision Situation.

3. To observe the normal walking route of the person passing through the automatic door, the daily walking route needs to be adjusted so that the person is walking toward the automatic door directly, instead of walking toward the automatic door at a certain angle.
4. When walking toward an automatic door, the sensing width range of the automatic door sensor should be greater than the width of the door fully opened.
5. If the automatic door is equipped with an auxiliary safety light sensor (infrared through-beam protection device), when the automatic door leaf is opened, people stand still and cover the auxiliary safety light sensor with their hands, and the door should remain open. Within a few seconds after the hand leaves, the door should close again.
In summary, the editor of ICU Automatic Door tells: a brief introduction to the knowledge about the daily inspection methods of automatic doors.