With the development of the medical industry, X-ray door is widely used, but many people don't know much about X-ray door products and don't know how to buy and install X-ray door products?

Purchase X-ray door products

1. Look at the overall material of X-ray door products

Due to the special application field, X-ray door products should not only be beautiful, but also stand the inspection of each working element. The door body of X-ray door products generally adopts the national standard steel fan rib, the panel adopts good stainless steel and lined with ray proof lead plate. As the door and window structure is reasonable and beautiful, the X-ray door manufacturer will also use composite protective plates and other high-pressure refined decorative plates. All hardware accessories are imported products. It is necessary to carefully consult the reference parameter manual when purchasing.

2. Look at the technical process of X-ray door products

X-ray door products are more technical than ordinary lead doors. A qualified X-ray door product needs to consider the product process: each switch needs to be flexible; Each control key shall be accurate; The measurement of all reserved data shall meet relevant requirements through professional instruments; These indicators are linked one by one to ensure that product safety meets national standards.

3. Look at the strength of X-ray door manufacturers

The strength of X-ray door manufacturers is not only the basis of product technology, but also the reference of good raw materials. The powerful X-ray door manufacturer has more mature and advanced technology, and the supply channel of raw materials is more guaranteed. This determines that the X-ray door produced by it has little price advantage, but it has better quality, longer service life, higher safety and safer after-sales service.

Where are the tips for installing X-ray door products

1. Check whether the X-ray door, X-ray protection inspection and power switch are flexible and stable.

2. Put your hand into the hole (remove the door frame if necessary) so that the inner surface of the edging strip contacts the wall, and correct the wall plane if necessary.

3. In order to realize the vertical and accurate positioning of the hinged side frame, it is necessary to ensure that the points and planes are on the same plane.

4. When the hinge side frame explodes under the tension of the holder, the holder or pull ring holder shall be strong enough.

5. Adjust the vertical part of the wide body in the locking position to make the gap in the middle of the frame symmetrical and fixed.

6. Open the X-ray protection door and check whether the power switch is flexible

7. after the cement mortar or foam rubber is dry, remove the notch and pad.

8. The door leaf adopts national standard steel frame, stainless steel plate as the control panel, lined with X-ray protective lead plate, combined with excellent cold pressing bonding process. Equipped with special stainless steel plate, special shaft hinge for safety door, hardware, imported special engineering hardware lock for safety protection. A variety of styles and specifications are available.